Part Details | ENGINE ACCESSORY GENERATOR
2920-00-022-0613 A generator primarily designed to be mounted on an internal combustion engine, and to be driven by the engine to keep the battery in a charged condition. May also supply current for the engine ignition system and/or electrical equipment which is connected to the battery circuit. Includes alternating current generators designed for use with a rectifier. Excludes the major generator of "GENERATING SETS". For generators specifically designed for aircraft use and not mounted on the engine, see GENERATOR, DIRECT CURRENT.
Alternate Parts: D34009, 1102339, 1102225, 1102339, 2920-00-022-0613, 00-022-0613, 2920000220613, 000220613
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 29 | MAY 10, 1968 | 00-022-0613 | 17311 ( GENERATOR, ENGINE ACCESSORY ) |
REFERENCE DRAWINGS & PICTURES
ROUND FLANGE WITH HOLES EQUALLY SPACED
STRAIGHT SHAFT END, THREADED, W/KEYWAY
Cross Reference | NSN 2920-00-022-0613
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| D34009 | 10988 | CNH INDUSTRIAL AMERICA LLC |
| 1102339 | 16764 | GENERAL MOTORS CORPDELCO REMY DIV |
| 1102225 | 16764 | GENERAL MOTORS CORPDELCO REMY DIV |
| 1102339 | 1LW55 | REMY, INC. |
Technical Data | NSN 2920-00-022-0613
| Characteristic | Specifications |
|---|---|
| VOLTAGE IN VOLTS | 12.0 |
| RECTIFIER LOCATION | SEPARATE |
| GROUNDING METHOD | EXTERNAL |
| SHAFT ROTATION DIRECTION | CLOCKWISE |
| MOUNTING STYLE | 5 ROUND FLANGE WITH HOLES EQUALLY SPACED |
| DISTANCE BETWEEN SHAFT CENTER AND BOTTOM MOUNTING HOLE CENTER | 3.052 INCHES MINIMUM AND 3.072 INCHES MAXIMUM |
| DISTANCE BETWEEN SHAFT CENTER AND TOP MOUNTING HOLE CENTER | 3.060 INCHES NOMINAL |
| DISTANCE BETWEEN INSIDE SURFACES OF HINGE BRACKET | 7.115 INCHES MINIMUM AND 7.139 INCHES MAXIMUM |
| DISTANCE BETWEEN OUTSIDE SURFACES OF HINGE BRACKET | 7.905 INCHES MINIMUM AND 7.929 INCHES MAXIMUM |
| BOTTOM MOUNTING HOLE DIAMETER | 0.379 INCHES MINIMUM AND 0.387 INCHES MAXIMUM |
| ANGULAR DEVIATION OF FIRST HOLE FROM TOP CENTER IN DEG | 193.0 |
| ANGULAR DEVIATION OF SECOND HOLE FROM FIRST HOLE IN DEG | 164.0 |
| MOUNTING HOLE THREAD SERIES DESIGNATOR | UNC |
| MOUNTING HOLE THREAD DIAMETER | 0.312 INCHES NOMINAL |
| MOUNTING HOLE THREAD QUANTITY PER INCH | 18 |
| MOUNTING HOLE THREAD CLASS | 2B |
| MOUNTING HOLE THREAD DIRECTION | RIGHT-HAND |
| SHAFT DRIVE END STYLE | STRAIGHT SHAFT END, THREADED, W/KEYWAY |
| THREAD LENGTH | 0.430 INCHES NOMINAL |
| SECOND STEP DIAMETER | 0.669 INCHES NOMINAL |
| KEYWAY WIDTH | 0.125 INCHES NOMINAL |
| UNTHREADED PORTION LENGTH | 0.750 INCHES MINIMUM AND 0.840 INCHES MAXIMUM |
| KEYWAY LENGTH | 0.625 INCHES NOMINAL |
| DISTANCE FROM END TO KEYWAY CENTER | 0.557 INCHES NOMINAL |
| THREAD SERIES | UN |
| THREAD DIAMETER | 0.625 INCHES NOMINAL |
| THREAD QUANTITY PER INCH | 20 |
| THREAD CLASS | 2A |
| THREAD DIRECTION | RIGHT-HAND |
| SUBMERSIBILITY | NONSUBMERSIBLE |
| FURNISHED ITEMS | LOCKWASHER AND NUT AND WOODRUFF KEY |