Part Details | SHOULDERED SHAFT
3040-00-018-9608 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 58901, 5890-1, A15HS0205, A15HS020-5, 3040-00-018-9608, 00-018-9608, 3040000189608, 000189608
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | MAY 10, 1968 | 00-018-9608 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-00-018-9608
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 5890-1 | 90166 | EATON AEROSPACE LLCDBA EATON AEROSPACE JACKSON |
| A15HS020-5 | 77272 | THE BOEING COMPANYDBA BOEING |
Technical Data | NSN 3040-00-018-9608
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL COMP 3310 |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-S-7393,COMP 1 MIL SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 25.0 MICROINCHES |
| FIRST END DIAMETER | 0.3750 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 PLAIN |
| SECOND END DIAMETER | 0.6450 INCHES MINIMUM AND 0.6500 INCHES MAXIMUM |
| SECOND END SPLINE LENGTH | 0.812 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 0.6138 INCHES MINIMUM AND 0.6188 INCHES MAXIMUM |
| SECOND END SPLINE MAJOR DIAMETER | 0.6450 INCHES MINIMUM AND 0.6500 INCHES MAXIMUM |
| SECOND END PITCH DIAMETER | 0.6294 INCHES MINIMUM AND 0.6344 INCHES MAXIMUM |
| SECOND END SPLINE QUANTITY | 12 |
| LARGEST STEP DIAMETER | 0.645 INCHES MINIMUM AND 0.650 INCHES MAXIMUM |
| OVERALL LENGTH | 2.187 INCHES NOMINAL |
| STEP QUANTITY | 4 |