Part Details | SHOULDERED SHAFT
3040-00-123-0662 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 2060402213, 206-040-221-3, 206040221003, 206-040-221-003, 3040-00-123-0662, 00-123-0662, 3040001230662, 001230662
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | NOV 01, 1968 | 00-123-0662 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
PLAIN
Cross Reference | NSN 3040-00-123-0662
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 206-040-221-3 | 97499 | BELL HELICOPTER TEXTRON INC.DBA BELL HELICOPTER |
| 206-040-221-003 | 97499 | BELL HELICOPTER TEXTRON INC.DBA BELL HELICOPTER |
Technical Data | NSN 3040-00-123-0662
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | PLAIN |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AMS6260 ASSN STD SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 16.0 MICROINCHES |
| FIRST END DIAMETER | 2.9400 INCHES NOMINAL |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 PLAIN |
| SECOND END DIAMETER | 1.2620 INCHES MINIMUM AND 1.2625 INCHES MAXIMUM |
| SECOND END SPLINE LENGTH | 1.115 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 1.1100 INCHES MINIMUM AND 1.1200 INCHES MAXIMUM |
| SECOND END SPLINE MAJOR DIAMETER | 1.2620 INCHES MINIMUM AND 1.2625 INCHES MAXIMUM |
| SECOND END PITCH DIAMETER | 1.2000 INCHES NOMINAL |
| SECOND END PRESSURE ANGLE | 30.0000 DEGREES NOMINAL |
| SECOND END SPLINE QUANTITY | 24 |
| LARGEST STEP DIAMETER | 2.940 INCHES NOMINAL |
| OVERALL LENGTH | 4.620 INCHES MINIMUM AND 4.660 INCHES MAXIMUM |
| STEP QUANTITY | 6 |
| FSC APPLICATION DATA | TRANSMISSION,HELICOPTER |