Part Details | SHOULDERED SHAFT
3040-00-135-6535 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 10876276, 3040-00-135-6535, 00-135-6535, 3040001356535, 001356535
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 08, 1969 | 00-135-6535 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
FLAT KEYWAY
CIRCULAR GROOVED
FLAT KEYWAY
CIRCULAR GROOVED
Cross Reference | NSN 3040-00-135-6535
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 10876276 | 19207 | U S ARMY TANK AUTOMOTIVE COMMANDAMSTA-IM-MM |
Technical Data | NSN 3040-00-135-6535
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | 7 FLAT KEYWAY |
| MATERIAL | 0$2$5 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-624 FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 63.0 MICROINCHES |
| FIRST END GROOVE WIDTH | 0.0560 INCHES MINIMUM AND 0.0600 INCHES MAXIMUM |
| FIRST END GROOVE DIAMETER | 1.3060 INCHES MINIMUM AND 1.3140 INCHES MAXIMUM |
| FIRST END DISTANCE FROM END TO GROOVE | 2.065 INCHES MINIMUM AND 2.069 INCHES MAXIMUM |
| FIRST END DIAMETER | 1.3781 INCHES MINIMUM AND 1.3785 INCHES MAXIMUM |
| FIRST END SPLINE LENGTH | 2.125 INCHES NOMINAL |
| FIRST END SPLINE MINOR DIAMETER | 1.1760 INCHES MINIMUM AND 1.1800 INCHES MAXIMUM |
| FIRST END SPLINE MAJOR DIAMETER | 1.3700 INCHES MINIMUM AND 1.3720 INCHES MAXIMUM |
| FIRST END SPLINE QUANTITY | 10 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 2 CIRCULAR GROOVED |
| SECOND END KEYWAY WIDTH | 0.3760 INCHES MINIMUM AND 0.3780 INCHES MAXIMUM |
| SECOND END EXTERNAL KEYWAY LENGTH | 1.467 INCHES NOMINAL |
| SECOND END DISTANCE FROM KEYWAY CENTER TO END | 0.812 INCHES NOMINAL |
| SECOND END DIAMETER | 1.5749 INCHES MINIMUM AND 1.5753 INCHES MAXIMUM |
| SECOND END INTERNAL THREAD LENGTH | 0.750 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 1.750 INCHES NOMINAL |
| OVERALL LENGTH | 10.375 INCHES NOMINAL |
| STEP QUANTITY | 5 |