Part Details | SHOULDERED SHAFT
3040-00-143-5345 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 1015740Y, 10-15740Y, 1015740, 10-15740, 1015740Y, 10-15740Y, 1015740Y, 10-15740Y, 1015740, 10-15740, 3040-00-143-5345, 00-143-5345, 3040001435345, 001435345
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 01, 1963 | 00-143-5345 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
PLAIN
FLAT KEYWAY
PLAIN
FLAT KEYWAY
Cross Reference | NSN 3040-00-143-5345
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 10-15740Y | 77820 | AMPHENOL CORPORATIONDBA AMPHENOL AEROSPACE OPERATIONS |
| 10-15740 | 77820 | AMPHENOL CORPORATIONDBA AMPHENOL AEROSPACE OPERATIONS |
| 10-15740Y | 0PYA5 | CONTINENTAL MOTORS, INC. |
| 10-15740Y | 59501 | UNISON INDUSTRIES, LLC |
| 10-15740 | 59501 | UNISON INDUSTRIES, LLC |
Technical Data | NSN 3040-00-143-5345
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | FLAT KEYWAY |
| MATERIAL | STEEL |
| MATERIAL DOCUMENT AND CLASSIFICATION | AAMS6330$AAMS6320$AAMS6322$JFA9-2901 AMERICAN SOCIETY FOR TESTING AND MATERIALS (ASTM) ALL MATERIAL RESPONSES |
| FIRST END KEYWAY WIDTH | 0.0580 INCHES MINIMUM AND 0.0595 INCHES MAXIMUM |
| FIRST END EXTERNAL KEYWAY LENGTH | 0.313 INCHES NOMINAL |
| FIRST END KEYWAY DEPTH | 0.071 INCHES NOMINAL |
| FIRST END DIAMETER | 0.1610 INCHES MINIMUM AND 0.1690 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 8 PLAIN |
| SECOND END DIAMETER | 0.4335 INCHES MINIMUM AND 0.4345 INCHES MAXIMUM |
| SECOND END SPLINE LENGTH | 0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM |
| SECOND END SPLINE MINOR DIAMETER | 0.4075 INCHES MINIMUM AND 0.4095 INCHES MAXIMUM |
| SECOND END SPLINE MAJOR DIAMETER | 0.4335 INCHES MINIMUM AND 0.4345 INCHES MAXIMUM |
| SECOND END PITCH DIAMETER | 0.4190 INCHES MINIMUM AND 0.4210 INCHES MAXIMUM |
| SECOND END PRESSURE ANGLE | 40.0 DEGREES NOMINAL |
| SECOND END SPLINE QUANTITY | 36 |
| LARGEST STEP DIAMETER | 0.590 INCHES MINIMUM AND 0.592 INCHES MAXIMUM |
| OVERALL LENGTH | 2.183 INCHES MINIMUM AND 2.193 INCHES MAXIMUM |
| STEP QUANTITY | 4 |