Part Details | SHOULDERED SHAFT
3040-00-148-0303 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: B15415, B15-4-15, 3040-00-148-0303, 00-148-0303, 3040001480303, 001480303
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | OCT 01, 1971 | 00-148-0303 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
TAPERED WITH FLAT
CIRCULAR GROOVED
TAPERED WITH FLAT
CIRCULAR GROOVED
Cross Reference | NSN 3040-00-148-0303
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| B15-4-15 | 82005 | ALLARD NAZARIAN GROUP, INC.DBA GRANITE STATE MANUFACTURING |
Technical Data | NSN 3040-00-148-0303
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | CIRCULAR GROOVED |
| MATERIAL | STEEL COMP 303 |
| MATERIAL DOCUMENT AND CLASSIFICATION | QQ-S-764,COND A FED SPEC SINGLE MATERIAL RESPONSE |
| SURFACE FINISH | 32.0 MICROINCHES |
| FIRST END GROOVE WIDTH | 0.0620 INCHES NOMINAL |
| FIRST END GROOVE DIAMETER | 0.9260 INCHES NOMINAL |
| FIRST END DISTANCE FROM END TO GROOVE | 0.090 INCHES NOMINAL |
| FIRST END DIAMETER | 0.9839 INCHES MINIMUM AND 0.9842 INCHES MAXIMUM |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | 7 TAPERED WITH FLAT |
| SECOND END GROOVE WIDTH | 0.0550 INCHES NOMINAL |
| SECOND END GROOVE DIAMETER | 0.5880 INCHES NOMINAL |
| SECOND END DISTANCE FROM END TO GROOVE | 0.097 INCHES NOMINAL |
| SECOND END KEYWAY WIDTH | 0.1553 INCHES MINIMUM AND 0.1568 INCHES MAXIMUM |
| SECOND END EXTERNAL KEYWAY LENGTH | 0.625 INCHES NOMINAL |
| SECOND END DISTANCE FROM KEYWAY CENTER TO END | 0.589 INCHES NOMINAL |
| SECOND END DIAMETER | 0.6250 INCHES NOMINAL |
| LARGEST STEP DIAMETER | 1.139 INCHES NOMINAL |
| OVERALL LENGTH | 2.827 INCHES NOMINAL |
| STEP QUANTITY | 3 |
| SPECIAL FEATURES | FIRST END S.A.E. 1948 STD INVOLUTE SPLINE 24/48 DIAMETRAL PITCH,FLAT ROOT 30 DEG PRESSURE ANGLE-.1309 CIR PITCH .0644(+.0000-.0015)CIR TOOTH THK 14 TEETH-CL A TOOTH SIDE FIT. BORE .5437 IN. DIA. |