Part Details | SHOULDERED SHAFT
3040-00-151-4025 A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (AA), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see AXLE(1), SHOULDERED. For items not having any of the above conditions see PIN, SHOULDER, HEADLESS. Excludes SHAFT(1), STRAIGHT; and AXLE(1), STRAIGHT.
Alternate Parts: 0216050, 02-16050, 3040-00-151-4025, 00-151-4025, 3040001514025, 001514025
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 30 | JAN 21, 1973 | 00-151-4025 | 22914 ( SHAFT, SHOULDERED ) |
REFERENCE DRAWINGS & PICTURES
SPLINED (STRAIGHT)
SPLINED (STRAIGHT)
Cross Reference | NSN 3040-00-151-4025
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 02-16050 | 99167 | HAMILTON SUNDSTRAND CORPORATION |
Technical Data | NSN 3040-00-151-4025
| Characteristic | Specifications |
|---|---|
| FIRST END STYLE | SPLINED (STRAIGHT) |
| MATERIAL | COPPER ALLOY |
| FIRST END DIAMETER | 0.2680 INCHES MINIMUM AND 0.2710 INCHES MAXIMUM |
| FIRST END SPLINE LENGTH | 0.540 INCHES MINIMUM AND 0.570 INCHES MAXIMUM |
| FIRST END SPLINE MINOR DIAMETER | 0.2030 INCHES MINIMUM AND 0.2130 INCHES MAXIMUM |
| FIRST END SPLINE MAJOR DIAMETER | 0.2680 INCHES MINIMUM AND 0.2710 INCHES MAXIMUM |
| FIRST END SPLINE QUANTITY | 12 |
| END SIMILARITY | NOT IDENTICAL |
| SECOND END STYLE | SPLINED (STRAIGHT) |
| SECOND END DIAMETER | 0.5950 INCHES MINIMUM AND 0.6000 INCHES MAXIMUM |
| SECOND END SPLINE LENGTH | 0.344 INCHES NOMINAL |
| SECOND END SPLINE MINOR DIAMETER | 0.4550 INCHES MINIMUM AND 0.4650 INCHES MAXIMUM |
| SECOND END SPLINE MAJOR DIAMETER | 0.5950 INCHES MINIMUM AND 0.6000 INCHES MAXIMUM |
| SECOND END SPLINE QUANTITY | 11 |
| LARGEST STEP DIAMETER | 0.860 INCHES NOMINAL |
| OVERALL LENGTH | 2.472 INCHES NOMINAL |
| STEP QUANTITY | 7 |