Part Details | TUBEAXIAL FAN
4140-00-007-1130 A nonpositive displacement mechanical device without guide vanes and having an axial fan impeller inclosed within a tubular housing. It is designed primarily for duct installation to move air or gas axially over a wide range of volumes at medium pressures.
Alternate Parts: D5194889, D5-19-4889, 7W66050, 7W66050, 4140-00-007-1130, 00-007-1130, 4140000071130, 000071130
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 41 | JUL 06, 1972 | 00-007-1130 | 04244 ( FAN, TUBEAXIAL ) |
REFERENCE DRAWINGS & PICTURES
FIXED
Cross Reference | NSN 4140-00-007-1130
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| D5-19-4889 | 81361 | EDGEWOOD CHEMICAL BIOLOGICAL CENTERECBC |
| 7W66050 | 75477 | HOWDEN NORTH AMERICA INC.DBA HOWDEN NORTH AMERICA |
| 7W66050 | 09519 | NEW PHILADELPHIA FAN COBUFFALO FORGE MARINE FANS |
Technical Data | NSN 4140-00-007-1130
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | FIXED |
| DIAMETER | 15.000 INCHES NOMINAL |
| LENGTH | 10.880 INCHES MINIMUM AND 11.000 INCHES MAXIMUM |
| HOUSING INSIDE DIAMETER | 15.090 INCHES MINIMUM AND 15.150 INCHES MAXIMUM |
| DRIVE TYPE | DIRECT |
| ROTATION DIRECTION FOR WHICH DESIGNED | COUNTERCLOCKWISE |
| PRIME MOVER TYPE | ELECTRIC MOTOR |
| SPEED ADJUSTMENTS | SINGLE SPEED |
| INCLOSURE TYPE | FULLY INCLOSED |
| AMBIENT TEMP AT FULL RATED POWER | -25.0 DEG FAHRENHEIT AND 130.0 DEG FAHRENHEIT |
| ELECTRICAL CONNECTION TYPE | WIRE LEAD |
| PRIME MOVER POWER RATING | 1.500 HORSEPOWER |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 3500.0 |
| VOLTAGE IN VOLTS AND CURRENT TYPE | 208.0 AC |
| PHASE | THREE |
| FREQUENCY IN HERTZ | 60.0 |
| AIR FLOW RATE | 2900.000 CUBIC FEET PER MINUTE MAXIMUM |
| STATIC PRESSURE AT SPECIFIED AIR FLOW RATE | 1.6 INCHES OF WATER |
| FLOW DIRECTION | INWARD |
| MOUNTING FACILITY TYPE AND QUANTITY | 16 UNTHREADED HOLE |
| TEST DATA DOCUMENT | 81361-D5-19-4889 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |