Part Details | VENTILATING FAN
4140-00-231-1414 A nonpositive displacement mechanical device having either an axial or centrifugal fan impeller. It is designed to move free air or gas from indoors to outdoors or vice versa over a wide range of volumes at low pressures. It is supported by a ring, plate, or shroud or may be inclosed in a housing. It is designed for installation in a window, roof or wall opening, or the like.
Alternate Parts: MBT2206F01, MBT2206F0-1, 247ASC0317001, 247AS-C0317-001, 4140-00-231-1414, 00-231-1414, 4140002311414, 002311414
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 41 | DEC 24, 1971 | 00-231-1414 | 04262 ( FAN, VENTILATING ) |
REFERENCE DRAWINGS & PICTURES
FIXED
Cross Reference | NSN 4140-00-231-1414
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| MBT2206F0-1 | 04320 | CURTISS-WRIGHT CONTROLS INTEGRATEDSENSING, INC. |
| 247AS-C0317-001 | 30003 | NAVAL AIR SYSTEMS COMMAND MANAGEDORIGINAL DESIGN ACTIVITY NOT |
Technical Data | NSN 4140-00-231-1414
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | FIXED |
| WIDTH | 3.438 INCHES NOMINAL |
| DIAMETER | 4.375 INCHES NOMINAL |
| LENGTH | 1.500 INCHES NOMINAL |
| HEIGHT | 3.625 INCHES NOMINAL |
| HOUSING INSIDE DIAMETER | 3.250 INCHES NOMINAL |
| QUANTITY | 1 |
| DRIVE TYPE | DIRECT |
| ROTATION DIRECTION FOR WHICH DESIGNED | COUNTERCLOCKWISE |
| PRIME MOVER TYPE | ELECTRIC MOTOR |
| SPEED ADJUSTMENTS | SINGLE SPEED |
| PRIME MOVER DRIVE SHAFT BEARING TYPE | BALL |
| INCLOSURE TYPE | FULLY INCLOSED |
| AMBIENT TEMP AT FULL RATED POWER | -25.0 DEG FAHRENHEIT AND 175.0 DEG FAHRENHEIT |
| ELECTRICAL CONNECTION TYPE | WIRE LEAD |
| PRIME MOVER POWER RATING | 0.014 HORSEPOWER |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 5200.0 |
| VOLTAGE IN VOLTS AND CURRENT TYPE | 200.0 AC |
| PHASE | THREE |
| FREQUENCY IN HERTZ | 400.0 |
| AIR FLOW RATE | 75.000 CUBIC FEET PER MINUTE NOMINAL |
| STATIC PRESSURE AT SPECIFIED AIR FLOW RATE | 0.0 INCHES OF WATER |
| ENVIRONMENTAL PROTECTION | MOISTURE RESISTANT |
| FLOW DIRECTION | OUTWARD |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 FLANGE AND 8 UNTHREADED HOLE |
| TEST DATA DOCUMENT | 30003-247AS0314-001 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |