Part Details | VENTILATING FAN
4140-00-813-8718 A nonpositive displacement mechanical device having either an axial or centrifugal fan impeller. It is designed to move free air or gas from indoors to outdoors or vice versa over a wide range of volumes at low pressures. It is supported by a ring, plate, or shroud or may be inclosed in a housing. It is designed for installation in a window, roof or wall opening, or the like.
Alternate Parts: 028361, M845HSVENTURI, C47362, C4736-2, M845HSVENTURI, 4140-00-813-8718, 00-813-8718, 4140008138718, 008138718
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 41 | APR 23, 1972 | 00-813-8718 | 04262 ( FAN, VENTILATING ) |
REFERENCE DRAWINGS & PICTURES
FIXED
Cross Reference | NSN 4140-00-813-8718
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 028361 | 5Y921 | COMAIR ROTRON INCSUB OF KL INDUSTRIES INC |
| M845HSVENTURI | 5Y921 | COMAIR ROTRON INCSUB OF KL INDUSTRIES INC |
| C4736-2 | 81755 | LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN AERONAUTICS |
| M845HSVENTURI | 82877 | ROTRON INCORPORATEDDBA AMETEK ROTRON |
Technical Data | NSN 4140-00-813-8718
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | FIXED |
| WIDTH | 4.680 INCHES NOMINAL |
| LENGTH | 1.500 INCHES NOMINAL |
| HEIGHT | 4.680 INCHES NOMINAL |
| HOUSING INSIDE DIAMETER | 4.220 INCHES NOMINAL |
| DRIVE TYPE | DIRECT |
| ROTATION DIRECTION FOR WHICH DESIGNED | CLOCKWISE AND COUNTERCLOCKWISE |
| PRIME MOVER TYPE | ELECTRIC MOTOR |
| SPEED ADJUSTMENTS | SINGLE SPEED |
| PRIME MOVER DRIVE SHAFT BEARING TYPE | SLEEVE |
| INCLOSURE TYPE | FULLY INCLOSED |
| AMBIENT TEMP AT FULL RATED POWER | 72.0 DEG CELSIUS |
| ELECTRICAL CONNECTION TYPE | TERMINAL |
| PRIME MOVER POWER RATING | 0.003 HORSEPOWER |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 3160.0 |
| VOLTAGE IN VOLTS AND CURRENT TYPE | 28.0 DC |
| AIR FLOW RATE | 100.0 CUBIC FEET PER MINUTE MAXIMUM |
| STATIC PRESSURE AT SPECIFIED AIR FLOW RATE | 0.0 INCHES OF WATER |
| FLOW DIRECTION | REVERSIBLE |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 FLANGE |
| TEST DATA DOCUMENT | 81755-4736-2 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |