Part Details | VANEAXIAL FAN
4140-01-031-9521 A nonpositive displacement mechanical device with guide vanes and having an axial fan impeller(s) inclosed within a tubular housing. It is designed primarily for duct installation to move air or gas axially over a wide range of volumes and pressures.
Alternate Parts: BT1625V22, BT1625V-2-2, 581R884H03, 4140-01-031-9521, 01-031-9521, 4140010319521, 010319521
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 41 | DEC 04, 1976 | 01-031-9521 | 04245 ( FAN, VANEAXIAL ) |
REFERENCE DRAWINGS & PICTURES
FIXED
Cross Reference | NSN 4140-01-031-9521
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| BT1625V-2-2 | 04320 | CURTISS-WRIGHT CONTROLS INTEGRATEDSENSING, INC. |
| 581R884H03 | 97942 | NORTHROP GRUMMAN SYSTEMS CORPORATIONDIV NORTHROP GRUMMAN SYSTEMS |
Technical Data | NSN 4140-01-031-9521
| Characteristic | Specifications |
|---|---|
| STYLE DESIGNATOR | FIXED |
| LENGTH | 4.310 INCHES NOMINAL |
| HOUSING INSIDE DIAMETER | 3.562 INCHES NOMINAL |
| QUANTITY | 1 |
| DRIVE TYPE | DIRECT |
| ROTATION DIRECTION FOR WHICH DESIGNED | CLOCKWISE |
| PRIME MOVER TYPE | ELECTRIC MOTOR |
| SPEED ADJUSTMENTS | SINGLE SPEED |
| INCLOSURE TYPE | FULLY INCLOSED |
| AMBIENT TEMP AT FULL RATED POWER | -65.0 DEG FAHRENHEIT AND 190.0 DEG FAHRENHEIT |
| ELECTRICAL CONNECTION TYPE | CONNECTOR RECEPTACLE |
| OPERATING SPEED AT RATED CAPACITY IN RPM | 7800.0 |
| VOLTAGE IN VOLTS AND CURRENT TYPE | 200.0 AC |
| PHASE | THREE |
| FREQUENCY IN HERTZ | 400.0 |
| AIR FLOW RATE | 110.0 CUBIC FEET PER MINUTE MAXIMUM |
| STATIC PRESSURE AT SPECIFIED AIR FLOW RATE | 0.0 INCHES OF WATER |
| FLOW DIRECTION | OUTWARD |
| STAGE QUANTITY | 1 |
| MOUNTING FACILITY TYPE AND QUANTITY | 2 RIM |
| SPECIAL FEATURES | DESIGNED FOR HIGH DENSITY GAS (SF6) OPERATION,RATINGS FOR HIGH DENSITY GAS PER TEST DATA DOCUMENT,100 HR BURN-IN REQUIRED |
| TEST DATA DOCUMENT | 97942-581R884 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| CRITICALITY CODE JUSTIFICATION | AFEAT$$ATEST |
| END ITEM IDENTIFICATION | FAN AND HEAT EXCHANGE ASSEMBLY,WESTINGHOUSE ELECTRIC CORPORATION,FLOATING DECK PULSER A1 |