NSN 5310-00-005-0097

Part Details | FLAT WASHER


5310-00-005-0097 A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use SHIM. For items fabricated from ceramic or electrically rated materials by specification or industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE, graphite impregnated and lubricated items.

Alternate Parts: 3020188, 5310-00-005-0097, 00-005-0097, 5310000050097, 000050097

Supply Group (FSG) NSN Assigned NIIN Item Name Code (INC)
53JUN 11, 197200-005-009713393 ( WASHER, FLAT )
REFERENCE DRAWINGS & PICTURES

RECTANGULAR

ROUND

ROUND


Cross Reference | NSN 5310-00-005-0097
Part Number Cage Code Manufacturer
302018800198PRATT & WHITNEY CANADA CIE DIVPRATT& WHITNEY CANADA CORP.

Technical Data | NSN 5310-00-005-0097
Characteristic Specifications
HARDNESS RATING35.0 ROCKWELL C MINIMUM AND 40.0 ROCKWELL C MAXIMUM
HOLE DIAMETER0.430 INCHES MINIMUM AND 0.440 INCHES MAXIMUM
PERIPHERAL SHAPE STYLE ROUND
OVERALL DIAMETER0.6665 INCHES MINIMUM AND 0.6675 INCHES MAXIMUM
CENTER HOLE SHAPE STYLE ROUND
CROSS-SECTIONAL SHAPE STYLE RECTANGULAR
THICKNESS0.095 INCHES MINIMUM AND 0.100 INCHES MAXIMUM
SPECIAL FEATURESCHAMFER OD EDGES 0.030 IN. MIN THRU 0.040 IN. MAX BY 45 DEG PLUS OR MINUS 5 DEG