Part Details | EXTRACTOR POST FUSEHOLDER
5920-00-900-0209 A fuseholder in which the clips or contacts for electrical connection to the fuse are mounted in a tubular body or similar inclosure which surrounds the fuse. It generally contains a removable cap or knob. It includes in-the-line type and those designated as miniature type FUSEHOLDER (as modified).
Alternate Parts: FHN46WB, 303, MILPRF1920730, MIL-PRF-19207/30, MILF1920730, MIL-F-19207/30, FHN46WB, 5920-00-900-0209, 00-900-0209, 5920009000209, 009000209
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 59 | FEB 10, 1967 | 00-900-0209 | 28909 ( FUSEHOLDER, EXTRACTOR POST ) |
REFERENCE DRAWINGS & PICTURES
PANEL MOUNTED TYPE
3 BUSHING MOUNTING W/4 HOLES
Cross Reference | NSN 5920-00-900-0209
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| FHN46WB | 71400 | COOPER BUSSMANN, LLCDBA COOPER BUSSMANN |
| 303 | 84613 | FIC CORPORATION |
| MIL-PRF-19207/30 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| MIL-F-19207/30 | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
| FHN46WB | 81349 | MILITARY SPECIFICATIONSPROMULGATED BY MILITARY |
Technical Data | NSN 5920-00-900-0209
| Characteristic | Specifications |
|---|---|
| FUSE ACCOMMODATION QUANTITY | 3 |
| CURRENT CARRYING RATING IN AMPS | 30.0 |
| VOLTAGE IN VOLTS | 250.0 |
| FUSE TERMINAL TYPE ACCOMMODATED | FERRULE |
| TERMINAL TYPE AND QUANTITY | 3 THREADED STUD AND 3 SCREW |
| SCREW THREAD DIAMETER | 0.138 INCHES NOMINAL |
| SCREW THREAD QUANTITY PER INCH | 32.0 |
| CONTACT MATERIAL | COPPER |
| CONTACT SURFACE TREATMENT | G0012 ANY ACCEPTABLE |
| BODY STYLE | PANEL MOUNTED TYPE |
| OVERALL LENGTH | 2.360 INCHES MINIMUM AND 2.400 INCHES MAXIMUM |
| OVERALL HEIGHT | 2.170 INCHES MINIMUM AND 2.210 INCHES MAXIMUM |
| OVERALL WIDTH | 1.040 INCHES MINIMUM AND 1.080 INCHES MAXIMUM |
| LENGTH FROM FRONT PROTRUSION TO MOUNTING SURFACE | 0.540 INCHES MINIMUM AND 0.580 INCHES MAXIMUM |
| CAP DIAMETER | 0.600 INCHES MINIMUM AND 0.640 INCHES MAXIMUM |
| MOUNTING HOLE STYLE | 3 BUSHING MOUNTING W/4 HOLES |
| CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG LENGTH | 0.745 INCHES MINIMUM AND 0.755 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN OUTSIDE MOUNTING HOLES ALONG WIDTH | 0.495 INCHES MINIMUM AND 0.505 INCHES MAXIMUM |
| BUSHING HOLE DIAMETER | 0.583 INCHES MINIMUM AND 0.598 INCHES MAXIMUM |
| CENTER TO CENTER DISTANCE BETWEEN BUSHING HOLES | 0.745 INCHES MINIMUM AND 0.757 INCHES MAXIMUM |
| SECOND CENTER TO CENTER DISTANCE BETWEEN BUSHING HOLES | 0.745 INCHES MINIMUM AND 0.757 INCHES MAXIMUM |
| MOUNTING HOLE QUANTITY | 4 |
| MOUNTING HOLE DIAMETER | 0.147 INCHES MINIMUM AND 0.157 INCHES MAXIMUM |
| ACCOMMODATED FUSE LENGTH | 1.250 INCHES NOMINAL |
| ACCOMMODATED FERRULE DIAMETER | 0.250 INCHES NOMINAL |
| ENVIRONMENTAL PROTECTION | WATERTIGHT AND BODY SEALED |
| TEST DATA DOCUMENT | 81349-MIL-F-19207 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). |
| SPECIFICATION/STANDARD DATA | 81349-MIL-F-19207 TO 30 GOVERNMENT SPECIFICATION |
| TERMINAL MATERIAL | BRASS |
| BODY MATERIAL | PLASTIC, DIALLYL PHTHALATE, MIL-M-14, TYPE SDG |
| PRECIOUS MATERIAL | SILVER |
| PRECIOUS MATERIAL AND LOCATION | CONTACT SURFACES SILVER |