Part Details | NONMETALLIC CHANNEL
9390-00-290-2206 A structural shape fabricated from nonmetallic material(s) having two vertical flanges that extend in the same direction from each end of a horizontal base. The vertical flanges may have various type tips and additional flanges which extend on the same plane as the base. It may have a reinforcing agent(s) and backing Excludes SEAL, NONMETALLIC CHANNEL.
Alternate Parts: 5429, 41481B, 4-148-1B, ASO2771, ASO-277-1, 9390-00-290-2206, 00-290-2206, 9390002902206, 002902206
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 93 | JAN 01, 1960 | 00-290-2206 | 30218 ( NONMETALLIC CHANNEL ) |
REFERENCE DRAWINGS & PICTURES
OPEN CHANNEL
LEFT INSIDE TAPER W/OUTSIDE RADIUS
RIGHT INSIDE TAPER W/OUTSIDE RADIUS
Cross Reference | NSN 9390-00-290-2206
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 5429 | 25472 | GOODRICH CORPORATION |
| 4-148-1B | 38597 | LOCKHEED MARTIN CORPORATIONDBA LOCKHEED MARTIN |
| ASO-277-1 | 80132 | NAVAL INVENTORY CONTROL POINT |
Technical Data | NSN 9390-00-290-2206
| Characteristic | Specifications |
|---|---|
| CROSS-SECTIONAL SHAPE STYLE | OPEN CHANNEL |
| OVERALL HEIGHT | 0.500 INCHES NOMINAL |
| OVERALL WIDTH | 0.187 INCHES NOMINAL |
| RIGHT SIDE FLANGE HEIGHT | 0.500 INCHES NOMINAL |
| LEFT SIDE FLANGE THICKNESS | 0.031 INCHES NOMINAL |
| RIGHT SIDE FLANGE THICKNESS | 0.031 INCHES NOMINAL |
| FILLET RADIUS WHERE LEFT FLANGE JOINS BASE FLANGE | 0.031 INCHES NOMINAL |
| OUTER RADIUS WHERE LEFT FLANGE JOINS BASE FLANGE | 0.062 INCHES NOMINAL |
| BASE FLANGE THICKNESS | 0.031 INCHES NOMINAL |
| OUTER RADIUS WHERE RIGHT FLANGE JOINS BASE FLANGE | 0.062 INCHES NOMINAL |
| FILLET RADIUS WHERE RIGHT FLANGE JOINS BASE FLANGE | 0.031 INCHES NOMINAL |
| LEFT-SIDE FLANGE TIP STYLE | 1 LEFT INSIDE TAPER W/OUTSIDE RADIUS |
| RIGHT-SIDE FLANGE TIP STYLE | 1 RIGHT INSIDE TAPER W/OUTSIDE RADIUS |
| LENGTH | 144.000 INCHES NOMINAL |
| MATERIAL | RUBBER SYNTHETIC |
| MATERIAL DOCUMENT AND CLASSIFICATION | MIL-R-6855, CLASS 2, TYPE A, GRADE 40 MIL SPEC SINGLE MATERIAL RESPONSE |
| NONMETALLIC HARDNESS RATING | 35.0 MINIMUM SHORE DUROMETER A AND 45.0 MAXIMUM SHORE DUROMETER A |
| MINIMUM TENSILE STRENGTH | 1300 POUNDS PER SQUARE INCH |
| TEMP RATING | -55.0 DEG CELSIUS AND 100.0 DEG CELSIUS |
| ENVIRONMENTAL PROTECTION | PETROLEUM AND LOW TEMPERATURE AND OZONE RESISTANT AND WEATHER RESISTANT |