Part Details | STRUCTURAL BEAM
9540-00-078-6107 A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges.
Alternate Parts: AND101361301, AND10136-1301, QQA20011, QQ-A-200/11, AMSQQA20011, AMS-QQ-A-200/11, 101361301, 10136-1301, 9540-00-078-6107, 00-078-6107, 9540000786107, 000786107
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 95 | JAN 01, 1963 | 00-078-6107 | 37018 ( BEAM, STRUCTURAL ) |
REFERENCE DRAWINGS & PICTURES
T SHAPE
LOWER RADIUS
FULL RADIUS
LOWER RADIUS
FULL RADIUS
LOWER RADIUS
FULL RADIUS
LOWER RADIUS
FULL RADIUS
Cross Reference | NSN 9540-00-078-6107
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| AND10136-1301 | 99237 | AIRFORCE-NAVY AERONAUTICAL DESIGNSTANDARD |
| QQ-A-200/11 | 81348 | FEDERAL SPECIFICATIONSPROMULGATED BY GENERAL SERVICES |
| AMS-QQ-A-200/11 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC |
| 10136-1301 | 29321 | TRANSTAR METALS CORP |
Technical Data | NSN 9540-00-078-6107
| Characteristic | Specifications |
|---|---|
| FABRICATION METHOD | EXTRUDED |
| HEAT TREATMENT | T-6 SOLUTION HEAT TREATED |
| LENGTH | 10.000 FEET NOMINAL |
| BASIC SHAPE STYLE | T SHAPE |
| OVERALL HEIGHT | 0.750 INCHES NOMINAL |
| LEFT SIDE TOP FLANGE THICKNESS | 0.050 INCHES NOMINAL |
| RIGHT SIDE TOP FLANGE THICKNESS | 0.050 INCHES NOMINAL |
| LEG THICKNESS | 0.050 INCHES NOMINAL |
| LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 0.687 INCHES NOMINAL |
| RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 0.687 INCHES NOMINAL |
| FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG | 0.093 INCHES NOMINAL |
| FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG | 0.093 INCHES NOMINAL |
| TOP FLANGE WIDTH | 1.374 INCHES NOMINAL |
| LEFT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| RIGHT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| FIRST TIP STYLE | LOWER RADIUS |
| FIRST TIP RADIUS | 0.050 INCHES NOMINAL |
| SECOND TIP RELATIONSHIP TO FIRST TIP | IDENTICAL |
| THIRD TIP RELATIONSHIP TO PRECEDING TIPS | NOT IDENTICAL |
| THIRD TIP STYLE | FULL RADIUS |
| THIRD TIP RADIUS | 0.025 INCHES NOMINAL |
| WEIGHT PER UNIT MEASURE | 0.130 POUNDS PER LINEAR FOOT |
| NONDEFINITIVE SPEC/STD DATA | 7075 ALLOY AND T6 TEMPER |