Part Details | STRUCTURAL BEAM
9540-00-079-6160 A structural shape fabricated from a ferrous or nonferrous material and resembles the following cross-sectional forms: For the letter H, both flanges of the H section are equal or longer than the width measured along the axis of the web; for the letter I, a 16 2/3 percent slope on the inside face of the ferrous type flange, either one or both of the nonferrous type flanges are shorter than the length measured along the axis of the web; for the letters T and Z, on nonferrous type, the web is usually at right angles to the flanges. Letter H section may have a maximum of 5 percent slope on the inside face of the flanges.
Alternate Parts: 2653E, 851C, 851-C, QQA270, AMSQQA2008, AMS-QQ-A-200/8, 6012445, 60-12445, PA8550, 9540-00-079-6160, 00-079-6160, 9540000796160, 000796160
| Supply Group (FSG) | NSN Assigned | NIIN | Item Name Code (INC) |
|---|---|---|---|
| 95 | JAN 01, 1963 | 00-079-6160 | 37018 ( BEAM, STRUCTURAL ) |
REFERENCE DRAWINGS & PICTURES
I SHAPE
UPPER RADIUS
LOWER RADIUS
UPPER RADIUS
LOWER RADIUS
UPPER RADIUS
LOWER RADIUS
UPPER RADIUS
LOWER RADIUS
Cross Reference | NSN 9540-00-079-6160
| Part Number | Cage Code | Manufacturer |
|---|---|---|
| 2653E | 77783 | ALCOA/REYNOLDS METALS COMPANY |
| 851-C | 01634 | ALUMINUM CO OF AMERICA |
| QQA270 | 81348 | FEDERAL SPECIFICATIONSPROMULGATED BY GENERAL SERVICES |
| AMS-QQ-A-200/8 | 81343 | SOCIETY OF AUTOMOTIVE ENGINEERS INC |
| 60-12445 | 29321 | TRANSTAR METALS CORP |
| PA8550 | 06012 | TRANSTAR METALS CORP |
Technical Data | NSN 9540-00-079-6160
| Characteristic | Specifications |
|---|---|
| FABRICATION METHOD | EXTRUDED |
| HEAT TREATMENT | T-6 SOLUTION HEAT TREATED AND ARTIFICALLY AGED |
| LENGTH | 10.000 FEET NOMINAL |
| BASIC SHAPE STYLE | I SHAPE |
| OVERALL HEIGHT | 5.000 INCHES NOMINAL |
| LEFT SIDE TOP FLANGE THICKNESS | 0.210 INCHES NOMINAL |
| RIGHT SIDE TOP FLANGE THICKNESS | 0.210 INCHES NOMINAL |
| RIGHT SIDE BOTTOM FLANGE THICKNESS | 0.210 INCHES NOMINAL |
| LEFT SIDE BOTTOM FLANGE THICKNESS | 0.210 INCHES NOMINAL |
| LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 1.500 INCHES NOMINAL |
| LEFT SIDE BOTTOM FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 1.500 INCHES NOMINAL |
| RIGHT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 1.500 INCHES NOMINAL |
| RIGHT SIDE BOTTOM FLANGE DISTANCE TO CENTER OF BOTH FLANGES | 1.500 INCHES NOMINAL |
| FILLET RADIUS WHERE TOP LEFT FLANGE JOINS WEB FLANGE/LEG | 0.310 INCHES NOMINAL |
| FILLET RADIUS WHERE BOTTOM LEFT FLANGE JOINS WEB FLANGE/LEG | 0.310 INCHES NOMINAL |
| FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG | 0.310 INCHES NOMINAL |
| FILLET RADIUS WHERE BOTTOM RIGHT FLANGE JOINS WEB FLANGE/LEG | 0.310 INCHES NOMINAL |
| WEB FLANGE THICKNESS | 0.210 INCHES NOMINAL |
| TOP FLANGE WIDTH | 3.000 INCHES NOMINAL |
| BOTTOM FLANGE WIDTH | 3.000 INCHES NOMINAL |
| LEFT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| LEFT BOTTOM INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| RIGHT TOP INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| RIGHT BOTTOM INSIDE ANGLE | 90.0 DEGREES NOMINAL |
| FIRST TIP STYLE | LOWER RADIUS |
| FIRST TIP RADIUS | 0.130 INCHES NOMINAL |
| SECOND TIP RELATIONSHIP TO FIRST TIP | IDENTICAL |
| THIRD TIP RELATIONSHIP TO PRECEDING TIPS | NOT IDENTICAL |
| THIRD TIP STYLE | UPPER RADIUS |
| THIRD TIP RADIUS | 0.130 INCHES NOMINAL |
| FOURTH TIP RELATIONSHIP TO PRECEDING TIPS | IDENTICAL W/THIRD TIP |
| WEIGHT PER UNIT MEASURE | 3.530 POUNDS PER LINEAR FOOT |
| NONDEFINITIVE SPEC/STD DATA | ALUMINUM ALLOY 6061 COMPOSITION AND T6 TEMPER |